MACHINES AND
ACCESSORIES
Page 18 of 35
7.4 Electric wiring
After checking that the power supply voltage corresponds to that indicated on the rating plate
(12 V
DC
), the Winch can be connected to the battery.
To make the connections it is necessary to use two pairs of
wires which come out of the coils box "C" (see figure 8).
The pair that exits from the rear is formed by two long
wires, one is red and the other is black. The red wire should
be connected to the positive (+) battery terminal, and the
black wire should be connected to the negative terminal (-).
Figure 7 Coils box and wires.
The coils box acts as a support for the winch motor.
Once the winch has been positioned on the box,
connect the two short wires protruding behind to the
respective motor terminals "D" and "E", as shown in
Figure 8
.
Figure
8
Connecting
the
winch.
Connecting the motor
Check that the direction of rotation of the drum corresponds to that indicated on the
command buttons!
In the event the direction of rotation is not correct, reverse the connection of the
electrical terminals of the Winch motor.
D
E
C
fervi.com
