MACHINES AND
ACCESSORIES
Page 8 of 28
7. Do not perform tasks on the machine other than those for which it was designed. Only
use the machine in the manner in which it was intended, as described in this instruction
manual.
8. Work without disturbances.
9. Work areas must be well lit.
10.Always wear eye protection and protective gloves while working. If dust is produced,
use the appropriate masks.
11.Wear appropriate clothing. Loose clothing, dangling jewellery, long hair, etc.., can get
caught in the moving parts, causing irreparable injury.
12.Replace worn and/or damaged parts, check that the guards and protection devices work
properly before operating. If necessary, have the machine checked by the service
support personnel. Use only original spare parts.
13.
Cut the mains voltage supply of the machine when:
the machine is not being operated;
it is left unattended;
performing maintenance or registration, because the machine does not work
properly;
the power cable is damaged;
the tool is replaced;
it is being moved or transported;
cleaning.
14.Do not use the machine in areas with a risk of fire and/or explosion.
15.It is recommended that users of this publication, for maintenance and repair, have a
basic knowledge of the mechanical principles and procedures inherent in repair
technique.
16.
The company safety officer is required to make sure that machine operators
have read and understood this manual in its entirety.
17.
The company safety manager is responsible for monitoring the company's risk
status according to Legislative Decree no. 81/08.
fervi.com
