MACHINES AND
ACCESSORIES
Page 18 of 28
8 INSTALLING THE MACHINE
8.1 Unpacking instructions
The sandblaster is supplied in a cardboard box.
Before disposing of the packaging, ensure all machine parts (eg screws), the owner's manual
and other documentation have been removed.
Standard packaging
Packaging materials (plastic bags, polystyrene foam, etc.) must not be left within reach of
children as these are potentially dangerous.
8.2 Assembly
To assemble the sandblaster, follow these steps:
1. Insert the rear swivel wheels into the holes in
the brackets below the main body of the
machine, then secure them with the M12 nuts
supplied, interposing a washer beforehand.
Figure 7 – Swivel wheels
2. Mount the rear swivel wheels onto the shaft, in
the following way:
insert the wheel into the shaft,
insert a washer for each wheel and
secure it with a cotter pin to be inserted
in the hole on the axle.
Repeat the same procedure for the other wheel.
Figure 8 – Fixed wheels.
fervi.com
