
MACCHINE E
ACCESSORI
Pagina 11 di 43
A
ll
rig
h
ts
o
f re
p
ro
du
ct
io
n
a
n
d
d
iv
u
lg
at
io
n
o
f t
h
is
T
ech
n
ical
M
an
u
al
an
d
m
en
tio
n
ed
a
n
d
/
o
r a
tta
ch
ed
d
ocu
m
en
ta
tio
n
, a
re
res
erv
ed
. I
t i
s
st
rict
ly
fo
rb
id
d
en
to
rep
ro
du
ce,
p
u
b
lis
h
o
r d
is
tr
ib
u
te
a
n
y
in
fo
rm
at
io
n
fr
o
m
th
is
m
an
u
al.
C
o
p
yri
gh
t b
y
FE
R
V
I
4
INTENDED USE AND DESCRIPTION OF THE
MACHINE
Pillar Drills (Art. 0260)
are machine-tools designed for executing some simple mechanical
operations, such as:
drilling;
boring and spot-facing.
The machine is made to perform such machining of different materials, changing the tool
depending on the operation to be performed and the material of the work-piece.
The machine has 16 different spindle rotation speeds. The motor runs at
constant speed: the machine is equipped with a specific power transmission
system by belts for varying the spindle rotation speed.
The latter can be set by moving the belts on the pulley grooves of the
transmission system. In any case, the adjustment of the spindle speed must
always be performed with the machine
stopped and not powered
.
With both models, the tool feed is manual. There is also a light to illuminate
the work area (Figure 1).
Figure 1
–
Lamp.
Intended use and materials
The machine has been designed and manufactured for the use specified. Any use and lack of
respect for the technical parameters established by the manufacturer may be dangerous to
operators; therefore, the manufacturer cannot assume any liability for resulting damages.
4.1
Usage environment and support surface
This drilling machine is equipped with a support base and must be installed and used on a
table or work bench with suitable ergonomic features and adequate strength.
It is very important to remember that the machine weight is about 60 kg. For this reason,
before installing the machine it is necessary to identify an area having a surface of adequate
hardness and strength, capable of supporting such weight.
You should leave enough space around the machine to ensure proper maintenance and
cleaning of all parts of the machine.
The Drill can operate in enclosed working environments (production departments,
warehouses, etc.), i.e. those that are protected from the weather and where there is no
danger of fire or explosion.
The operating temperature is within the range of +5 / +50°C.
The environment must also be sufficiently illuminated so as to ensure operation in maximum
safety (at least 50 lux is recommended).
fervi.com