MACHINES AND
ACCESSORIES
Page 6 of 21
4. Use only specific chemical products for cleaning mechanical parts as stated by the
manufacturer and use them according to the indications provided.
5. Used cleaning liquids must be disposed of in accordance with current standards
regarding environmental hygiene.
6. Keep the workplace tidy and free from hindrances; disorder causes accidents.
7. Make sure that the work environment is forbidden to children, non-employees and
animals.
8. Do not make demands of the equipment in excess of its design limits. Only use the
equipment in the manner in which it was intended, as described in this instruction
manual.
9. Disconnect the power supply when:
not using the equipment;
is left unattended;
you are performing maintenance or adjustment because the machine does not
work properly;
in case the machine is being moved to another location;
you are cleaning the machine.
10.Work without disturbances.
11.Work areas must be well lit.
12.Wear appropriate clothing.
13.Replace worn and/or damaged parts, check that the repairs and protections work
properly before operating. If necessary, have the machine checked by the service
support personnel. Use only original spare parts.
14.It is recommended that users of this publication, for maintenance and repair, have a
basic knowledge of mechanical principles and of repair technique procedures.
15.
The company safety officer is required to make sure that equipment operators
have read and understood this manual in its entirety.
16.
Management is responsible for safety and verification of the company's risk
status according to Legislative Decree 81/08.
2.2 Safety regulations for the electrical system
Modifications to the electrical system
Do not modify the machine's electrical system in any way.
Work carried out in the electrical system of the machine must be carried out only by
authorized personnel.
1. The supply voltage of the equipment must correspond to that stated on the plate and
in the technical specifications (230 V / 50 Hz).
Do not use any other power supply.
2. The use of a life-saving device on the electric power supply for a nominal trip range of
10 to 30 mA is recommended. For more detailed information, contact a trusted
electrician.
fervi.com
