Fervi 0024 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 9

Fervi 0024 Скачать руководство пользователя страница 8

HARDWARE

Page 8 of 9

6 MAINTENANCE AND CLEANING

The purpose of this chapter is to provide all the cadences and maintenance procedures
necessary to maintain the efficiency of the

Paint Stripper

.

INTERVENTION

Frequency

Daily

Weekly

1. General visual inspection

X

2. General cleaning

X

3. Clean the air outlet nozzle

X

1.

General visual inspection:

check the overall status of the device and, in particular,

the flexible power cable and the presence of any damage or missing parts.

Condition of the Power Supply Cord



The power cord only protects from hot parts for a brief moment. According to safety

standards, the device may not be used if the cable has been damaged.



If the power supply cord is cut or damaged, it must be replaced by trained personnel

with an equivalent cord.

2.

General cleaning:

cleaning is necessary to rid the body of paint, dust or dirt

accumulation.

Risks associated with cleaning

Disconnect the plug from the power outlet and wipe the body of the device, only when at
room temperature. Do not use organic solvents to avoid deformation or discolouration.

3.

Clean the air outlet nozzle:

cleaning is necessary to free the hot air outlet nozzle of

paint build-up. Keep inlets and outlets clean and free from dirt and debris. Use only
common household cleaning products to clean the nozzle. DO NOT use paint thinner,

gasoline, or similar substances to clean the nozzle.

fervi.com

«
...
6
7
8
9
»

Содержание 0024










Отзывы:

Нет отзывов