Ferroli TOP FAN Plus rem, Инструкция по эксплуатации, Страница: 5 / 16

5
FOREWORD - REMOTE CONTROL
INFORMAZIONI GENERALI
Il telecomando funziona con due batterie non ricaricabili da 1,5 V. When the batteries are low, the remote control
display tends to become dim. If the batteries are not replaced, the display will go off completely.
Fig. 1
Fig. 2
Inserimento batterie:
• Remove the cover of the battery compartment at the back of
the remote control.
• Remove the used batteries and insert new batteries.
Wait 10 minutes before fitting the new batteries.
The remote control uses two alkaline batteries (1.5 V, LR03x2).
• Do not use used batteries or batteries of different types, as
this may cause the unit to malfunction.
• The average battery life during normal use is approximately
one year. The remote control used batteries must be disposed
of according to the standards in force.
Important: The remote control will not work for at least 10
minutes between removal of the flat batteries and fitting the
new ones .
The maximum operating range for the remote control is approx.
5 m.
No obstructions such as curtains or plants should be between
control and unit.
Direct sun on the unit receiver may interfere with good signal
reception ( for VM-B VM-F versions ) ( Fig. 1) or on the remote
receiver for VN units ( Fig. 2) and press the button for the
required function.
After selecting the function to be set, press the On/Send button for
sending the command to the unit.
The operating setting to the unit are sent by the remote control
through an infrared ray.
The emitter is placed on top of the remote control just over the
display.
For this reason, the remote control must be directed towards
the unit before sending any message and care must be taken
that no obstructions are between the remote control and the
unit.
The symbol on the display left side indicates that the
message has been correctly sent.
An acoustical acknowledgement sound (beep) will indicate that
signal has been received.
TIMER ON
ON/OFF
max 800mm