19
WARNING
4. Insert the cable of the rear cover into the installation box (cassette type). Use pan head
screws to fix the rear cover of the wired controller on the installation box (cassette type);
connect the flat cable that connects the front and rear PCBs.
Installation box
(cassette type)
Cross recessed
head screw
Front cover of
wired controller
Rear cover of
wired controller
Connection power
supply board
● Do not overtighten the pan head screws, otherwise the rear
cover of the wired controller may deform and cannot be
levelled on the wall surface, which makes it difficult to install
or not securely installed.
EN