Ferroli RXA 11.1, Инструкция по установке и эксплуатации

Страница: 29 / 40

29
CONTROL SYSTEM
Menu Access procedure Sub menu
Parameters
Available functions
Operating
mode
Press ESC button for long
(ESC button associated function)
Stby
-
Operating mode
change
HEAT
COOL
Status
Press SET button
(SET button direct function)
Ai
Ai01 Display input AI1
Ai02 Display input AI2
Ai03 Display input AI3
Ai04 Display input AI4
Di
Di01 Display input ID1
Di02 Display input ID2
Di03 Display input ID3
Di04 Display input ID4
Di05 Display input ID5
AO
tc1
Display output TK1
AO1
AO3
Display output AO3
DO
DO01 Display output DO1
DO02 Display output DO2
DO03 Display output DO3
DO04 Display output DO4
DO05 Display output DO5
CL
HOUR Clock adjustment : time
Date Clock adjustment : date
year Clock adjustment : year
AL - Display active alarms
SP
HEAT Set point display and setting : heating
COOL Set point display and setting : cooling
SR
HEAT Display real set point : heating
COOL Display real set point : cooling
Hr
CP01 Display compressor operating hours
PU01 Display pump operating hours
Programming
Press
ESC + SET
buttons at the same time
(combined functioni
ESC + SET
buttons)
PAR
CF
CF19 Remote stand by enable
CF20 Remote Cooling-Heating enable
CF63 Device address (Modbus protocol)
CF71 Display device identification - map
tr
tr01 Heat pump enable
tr17 Heat pump lock set point
PI
PI05 Modulating pump speed : cooling
PI11 Modulating pump speed : heating
Hi Hi02 Integrative electrical heaters enable
FNC EUR Alarm memory reset
EU - Alarm memory display
The control system provides for three menus with tree structure.
To go from one level to the level below press the SET button. To return to the upper level press the ESC button.
To scroll the menu up and down inside the same level, press respectively the UP and DOWN buttons.
To modify the value of the selected parameter press the UP and DOWN buttons. Press the SET button to confirm the new value.
Press the ESC button not to confirm the new value.
Menu structure