BLUEHELIX TOP RRT K 50
220
EN
cod. 3541Q281 - Rev. 02 - 10/2020
If the room temperature is lower than the required value, it is advisable to set a higher order curve and vice versa. Pro-
ceed by increasing or decreasing in steps of one and check the result in the room.
Adjustments from Remote Timer Control
A
If the boiler is connected to the Remote Timer Control (optional), the previously described adjustments are
managed as described in table 1.
Table 1
fig. 14- Compensation curves
fig. 15- Example of compensation parallel
curve offset
Heating temperature adjustment
Adjustment can be made from the Remote Timer Control menu and the boiler control
panel.
DHW temperature adjustment
Adjustment can be made from the Remote Timer Control menu and the boiler control
panel.
Summer/Winter Switchover
Summer mode has priority over a possible Remote Timer Control heating demand.
Eco/Comfort selection
On disabling DHW from the Remote Timer Control menu, the boiler selects Economy
mode. In this condition, the
eco/comfort
button on the boiler panel is disabled.
By enabling DHW from the Remote Timer Control menu, the boiler selects Comfort mode.
In this condition it is possible select one of the two modes on the boiler panel.
Sliding Temperature
You can make all the adjustments by using the remote timer control.
20
30
40
50
60
70
80
90
85
20
10
0
-10
-20
1
2
3
4
5
6
8
9
10
7
20
30
40
50
60
70
80
90
85
20
30
40
50
60
70
80
90
85
1
2
3
4
5
6
8
9
10
7
1
2
3
4
5
6
8
9
10
7
OFFSET = 20
OFFSET = 40
