Ferrofish PULSE 16, Руководство пользователя

Страница: 5 / 28

5
Operation
The PULSE16 can be operated completely from the front panel by using the SELECT pot
and the MENU button. The POWER button can be used as a “home button” and for
switching the unit on and off. For switching it off, keep the button pressed for over 3
seconds. When you do, a countdown will be shown on the screen to prevent accidental-
ly shutting down the unit. You can control the PULSE16 over the integrated 5-pin MIDI
Port or via MIDI-over-MADI (MADI MX Option required). The main screen shows the
levels of all 16 analog inputs and outputs as well as important status information. Press
POWER to get back into this screen from every sub menu.
The status bar below the level I/O’s show:
• Wordclock sync source and sample frequency
• MADI I/O (MADI MX option required):
grey = no connection, yellow = signal detected, green = locked on sample frequency
• Status of the ADAT inputs 1-4. Same color coding like MADI.
• BNC Wordclock Input
• MIDI input indicator
• MIDI-over-MADI I/O (MADI MX option required)
• Active preset number
The sync master port (ADAT, BNC or MADI) is indicated by a flashing “square-wave” icon.