Ferrofish A32 DANTE, Руководство пользователя, Страница: 8 / 40

8
main menu - CLOCK
The CLOCK SOURCE menu lets you select the wordclock source and the
sample frequency of the A32 DANTE.
The numbers below the labels show the internally generated clock as
Master or the measured external sample rate. If no sample rate is
detected, „---“ will be displayed.
MASTER
If you set the clock source to MASTER, the internal A32 DANTE clock
generator will be used.
MADI, ADAT
When selecting MADI or ADAT, the wordclock will be extracted from the
corresponding data stream. This signal will be refreshed by the internal
digital PLL. When using higher sample frequencies, SMUX will be used.
Depending on the mode, you also need to select the correct SMUX mode
manually.
BNC
Another option is to directly apply a wordclock signal to the BNC input.
Same like with the other inputs, also this input will be refreshed by the
digital PLL.
DANTE
Here you can select Dante as wordclock master. If you intend to use
Dante, it’s generally recommended to use the Dante clock as wordclock.