Ferrofish A32 DANTE, Руководство пользователя, Страница: 19 / 40

19
main menu - SETUP - SETTINGS
Inside the SETTINGS menu the following items can be changed:
BNC Termination
The wordclock of the A32 DANTE is terminated internally with a 75 ohm
resistor by default. When daisy chaining the wordclock of several units,
you should leave this option set to ON. If you’re using T-connectors, set
this option to OFF.
MADI 96k Frame
There are two MADI transfer standards for the SMUX/2 mode (64kHz –
96kHz):
•
48k Frame: Identical to SMUX/1. The signal of 1 channel is split
(multiplexed) across a pair of 2 channels in order to double the
bandwidth. The usual 64 MADI channels are therefore reduced to
32 channels.
•
96k Frame:
The MADI stream is natively reduced to 32 channels by
increasing the frame size and allowing channels to be transmitted
directly.
Both formats transfer the same number of channels (32). The advantage
of the 96k frame mode is that the receiver can distinguish between
SMUX/1 and SMUX/2 mode automatically and can switch appropriately.
Please ensure all units use the same setting.
MADI short frame
Using the full bandwidth of MADI you can transfer 64 (SMUX/2: 32,
SMUX/4: 16) channels. By setting MADI short frame, the A32 DANTE will