ferroamp Rogowski 1200A, Руководство по установке

Страница: 7 / 10

5
ENGLISH
1 Introduction
In this manual you will find instructions for installing Rogowski
current transformers. Be sure to read the instructions carefully to
avoid unnecessary errors.
1.1 Included items
The following items are included in the delivery of a set of
Rogowski current transformers:
Artikel Antal
Current Transformers 1
RS Current Transformer 1
Delta 230/24V adapter 1
Terminal Block 1
Installation manual 1
1.2 Warnings and reservations
RECOMMENDATION! Read through the manual before installation.
RECOMMENDATION! Only use this product according to the
instructions supplied to avoid any danger.
WARNING! This product may not be opened by unauthorized
personnel. Contact the reseller if you need service.
WARNING! The electrical installations shall be conducted by
authorized personnel and in accordance with local and national
electrical standards and safety measures.
WARNING! You are not allowed to connect units to the DC nanogrid
when it is energized.
WARNING! Risk of electrical shock/arc if the product is not used
according to the instructions in the manual.
WARNING! Do not use the product if you suspect the product is
damaged. Let it be inspected by qualified personnel before use.
WARNING! Do not use the product if the housing has been
tampered with or not intact, for example during repair, do not
touch exposed parts.
NOTE! The warranty does not apply if the product has been
modified, tampered with, or not installed in accordance with this
manual.
1.3 Explanation and safety notices
1.4 Components
1. Current transformers
2. RS Current Transformer
3. Delta 230 / 24V adapter
4. Terminal block
2 Installation
The installation section will take you through the entire process
step by step on how to install a set of Rogowski current
transformers. Note that the installation procedure looks different
depending on whether it is an XL-wall unit, 2.1, or a XL-cabinet,
2.2.
NOTE! Ferroamp does not take responsibility for damage caused to
the product due to incorrect or careless installation.
The flash symbol in an equilateral triangle warns
of dangerous voltage.
The exclamation mark in an equilateral triangle is
intended to warn the user that negligence of this
information can be life threatening!
The exclamation mark in a circle is intended to
inform the user that neglect of this information
may be associated with bodily injury and / or
damage to the product.
Do not work alone. In an emergency, someone else's
presence may be necessary!
The electrical installation must comply with national
/ local laws and regulations, appropriate standards
and applicable requirements from recognized
organizations.