background image

Ferris Industries
5375 North Main Street
Munnsville, NY 13409
800-933-6175

www.ferrisindustries.com

© Copyright 2003  Ferris Industries
All Rights Reserved. Printed in USA.

FERRIS LIMITED WARRANTY

IMPORTANT
This warranty shall apply ONLY if the warranty registration form has been completed and
returned to Ferris Industries, Inc. within 20 days from the date of delivery.

Ferris Industries, Inc. (Ferris) warrants, in accordance with the provisions below, to the
original purchaser for the period of twenty-four (24) months from the date of delivery of a
Ferris mower that the mower is free from defects in material or workmanship. Ferris’ obli-
gation under this warranty is to repair or replace, at Ferris’ election, without charge and at
the place of business of a dealer authorized to handle Ferris mowers, any part or parts of
the machine which, in the judgment of Ferris, prove to be defective.

THIS WARRANTY AND FERRIS’ OBLIGATION HEREUNDER IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THE
IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS
FOR PARTICULAR PURPOSE, and all other obligations or liabilities of Ferris for incidental
and consequential damages resulting from the design, manufacture, sale or use of the
machine. No person is authorized to make any warranty or assume for Ferris any liability
not strictly in accordance with this warranty.

This warranty shall not apply to any mower part which, in the judgment of Ferris, has been
altered or tampered with in any way or has been subjected to misuse, neglect or accident,
or has had the serial numbers altered, effaced or removed. This warranty does not apply
to component parts not manufactured by Ferris (motors, batteries, tires, belts) except to
the extent of their individual manufacturer’s guarantees.

Ferris Industries, Inc. is continually striving to improve its products, and therefore reserves
the right to make improvements or change when it becomes practical and possible to do
so, without incurring any obligation to make changes or additions to the equipment sold
previously.

Содержание IS4000Z/D31















































Отзывы: