Not for
Reproduction
16
7
Cutting Height Adjustment Pin
Deck Lift Lock Lever
Cutting Height Pin Storage Hole
Deck Lift Lockout Plate:
The deck lift lock lever lockout plate (A, Figure 8) can be
used to prevent the mower deck from locking the deck in the
6" (15,2 cm) position if you raise the deck during operation to
clear an object.
8
UNLOCK:
This position will allow the mower deck to
be raised and lowered without locking in the TRANSPORT
position when raised.
LOCK:
This position will allow the mower deck to lock in
the TRANSPORT position when raised.
Parking Brake:
Pull the parking brake lever back to
engage the parking brake. Move the lever fully forward to
disengage the parking brake.
Note:
To start the unit the parking brake must be engaged.
DISENGAGE:
Releases the parking brake.
ENGAGE:
Locks the parking brake.
Ground Speed Control Levers:
These levers control the
ground speed and direction of the rider. The left lever controls
the left rear drive wheel and the right lever controls the right
rear drive wheel.
9
A.
FORWARD
B.
NEUTRAL
C.
REVERSE
D.
NEUTRAL LOCK POSITION
Moving a lever forward (A, Figure 9) from the NEUTRAL
position (B) increases the FORWARD speed of the
associated wheel, and pulling back (C) on a lever increases
the REVERSE speed.
Moving a levers outwards (D) from the NEUTRAL position
locks the levers in the NEUTRAL position.
Note:
The further a lever is moved away from the neutral
position, the faster the drive wheel will turn.
See the
Zero-Turn Driving Practice
section for steering
instructions.
Fuel Level Gauge:
Displays the fuel level in the tank.
Seat Adjustment Lever:
The seat can be adjusted forward
and back. Move the lever, position the seat as desired, and
release the lever to lock the seat in position.
Retractable Seat Belt:
The seat belt is used to secure the
operator to the seat.
Содержание 5901850
Страница 1: ...N o t f o r R e p r o d u c t i o n...
Страница 38: ...N o t f o r R e p r o d u c t i o n Notes...
Страница 39: ...N o t f o r R e p r o d u c t i o n Notes...
Страница 40: ...N o t f o r R e p r o d u c t i o n...