Ferris 5901849 Скачать руководство пользователя

Страница: 57 / 60

Not for

Reproduction

caused by lack of maintenance or use of non-original or non-

equivalent parts is not covered by warranty.

Normal Wear and Tear

- Like all mechanical devices, the

unit is subject to wear even when properly maintained. This

warranty does not cover replacement or repairs when normal

use has exhausted the life of a part or the equipment. Except

as noted in the warranty period, maintenance and wear items

such as filters, belts, cutting blades, and brake pads (except

engine brake pads) are not covered by warranty due to wear

characteristics alone, unless the cause is due to defects in

material or workmanship.

Stale or Unapproved Fuel

- In order to function correctly,

this product requires fresh fuel that conforms to the criteria

specified in the Operator's Manual. Engine or equipment

damage caused by stale fuel or the use of unapproved

fuels (such as E15 or E85 ethanol blends) is not covered by

warranty.

Other Exclusions

- This warranty excludes damage due

to accident, abuse, modifications, alterations, improper

servicing, freezing or chemical deterioration. Attachments

or accessories that were not originally packaged with the

product are also excluded. This warranty does not include

used, reconditioned, second-hand, or demonstration

equipment or engines. This warranty also excludes failures

due to acts of God and other force majeure events beyond

the manufacturer's control.

5419128 Revision -

Содержание 5901849





























































Результаты поиска

Содержание 5901849

Отзывы:

Похожие инструкции для 5901849

Бренды по названию

Популярные бренды

Ferris 5901849, Руководство оператора

Результаты поиска

Содержание 5901849

Отзывы:

Похожие инструкции для 5901849

Бренды по названию

Популярные бренды