Not for
Reproduction
19
9
A.
Seat Adjustment Lever (Forwards/Backwards):
The
seat can be adjusted forwards and backwards. Move the
forwards/backwards seat adjustment lever, position the
seat as desired, and release the lever to lock the seat in
position.
B.
Seat Adjustment Knob (Suspension/Ride Comfort):
The seat adjustment knob adjusts the suspension of the
seat (ride comfort). Turn the adjustment knob until the
display scale has a reading that matches the weight of
the operator.
C.
Lumbar Adjustment Lever (Located underneath right
hand arm rest):
Turn the lumbar adjustment knob until
the desired amount of lumbar is achieved.
D.
Back Angle Adjustment Knob:
Turn the back angle
adjustment knob until the desired amount of back angle is
achieved.
E.
Retractable Seat Belt:
The seat belt is used to secure
the operator to the seat.
Fuel Selector Valve:
Turning the handle to the desired
position determines which tank will be supplying fuel. With
the handle pointing LEFT, it will draw fuel from the left-hand
tank. With the handle pointing RIGHT, it will draw fuel from
the right-hand fuel tank. With the handle pointing towards the
operator, it will shut off fuel flow to the engine.
Fuel Tank Cap:
To remove the cap, turn
counter-clockwise
.
Removable Floor Plate:
The floor plate can be removed for
easy access to the mower deck. To remove the plate, remove
the retainer hardware and tilt the floor pan up and then
remove from the unit. Reverse the process for re-installation.
Transmission Oil Fill:
Transmission oil is added through the
hydraulic oil tanks. It also serves as extra holding capacity
for oil as the transmissions heat up and the hydraulic oil
expands. See
Check / Fill Transmission Oil
for oil level check
and fill procedures.
Transmission Release Levers:
Symbol
Control Name
Transmission Release Levers
This unit is equipped with two transmission release levers.
The transmission release levers deactivate the transaxle
so that the unit can be pushed by hand. Both transmission
release levers must be in the same position whether you are
driving the unit or pushing it by hand. See
Pushing the Unit by
Hand
for operational information.
Seat Latch:
The seat latch (A, Figure 10) secures the seat
plate to the frame of the unit
10
To raise the seat plate, release the latch by moving the seat
latch towards the front of the unit and then raise the seat
plate.
The seat latch is spring loaded. When the seat plate is
lowered back into place the seat latch will lock the seat plate
into place.
Instrument Control Panel
Carbureted Models:
Содержание 5901843
Страница 1: ...N o t f o r R e p r o d u c t i o n...
Страница 56: ...N o t f o r R e p r o d u c t i o n...
