29
Raise and Lower the Roll Bar
To Lower the Roll Bar:
1. Pull the hair pin clips (
A, Figure 14
) out of the retainer
pins (
B
).
2. Push or pull the top of the roll bar (
C
) forward against
the rubber stops (
D
) and remove the retainer pins (
B
).
3. Lower the roll bar and reinstall the retainer pins and hair
pin clips to secure the roll bar in the down position (
see
insert, Figure 14
).
To Raise the Roll Bar:
1. Pull the hair pin clips (
A
) out of the retainer pins (
B
) and
remove the retainer pins.
2. Raise the roll bar (
C
) until the rubber stops (
D
) contact
the upright tubes.
3. Push or pull the top of the roll bar forward against the
rubber stops and reinstall the retainer pins and hair pin
clips to secure the roll bar in the raised position.
Figure 14. Raise & Lower the Roll Bar
A. Hair Pin Clip
B. Retainer Pin
C. Roll Bar
D. Rubber Stop
C
B
A
D
D
C
WARNING
Avoid serious injury or death from roll
over.
• Keep the roll bar in the raised position and use seat belt.
• There is no roll over protection when the roll bar is
down.
• Lower the roll bar only when necessary and NEVER
remove it.
• Do NOT use the seat belt when the roll bar is down.
• Raise the roll bar as soon as clearance permits.
• Do NOT jump off if mower tips.
Operation
Not
for
Reproduction
