background image

20

www.ferrisindustries.com

Operation

Storage

Temporary Storage (30 Days Or Less)

Remember, the fuel tank will still contain some 
gasoline, so never store the unit indoors or in any 
other area where fuel vapor could travel to any ignition 
source. Fuel vapor is also toxic if inhaled, so never 
store the unit in any structure used for human or 
animal habitation.

Here is a checklist of things to do when storing your 
unit temporarily or in between uses:

  •  Keep the unit in an area away from where children 

may come into contact with it. If there’s any 
chance of unauthorized use, remove the spark 
plug(s) and put in a safe place. Be sure the spark 
plug opening is protected from foreign objects with 
a suitable cover.

  •  If the unit can’t be stored on a reasonable level 

surface, chock the wheels.

  •  Clean all grass and dirt from the mower.

Long Term Storage (Longer Than 30 Days)

Before you store your unit for the off-season, read the 
Maintenance and Storage instructions in the Safety 
Rules section, then perform the following steps:

 1.  Drain crankcase oil while engine is hot and refill 

with a grade of oil that will be required when unit is 
used again.

 2.  Prepare the mower deck for storage as follows:

a.  Remove mower deck from the unit.

b.  Clean underside of mower deck.

c.  Coat all bare metal surfaces with paint or light 

coat of oil to prevent rusting.

 3.  Clean external surfaces and engine.

 4.  Prepare engine for storage. See engine owner’s 

manual.

 5.  Clean any dirt or grass from cylinder head cooling 

fins, engine housing and air cleaner element.

 6.  Cover air cleaner and exhaust outlet tightly with 

plastic or other waterproof material to keep out 
moisture, dirt and insects.

 7.  Completely grease and oil unit as outlined in the 

LUBRICATION section.

 8.  Clean up unit and apply paint or rust preventative 

to any areas where paint is chipped or damaged.

 9.  Be sure the battery is filled to the proper level 

with water and is fully charged. Battery life will be 
increased if it is removed, put in a cool, dry place 
and fully charged about once a month. If battery is 
left in unit, disconnect the negative cable.

10. Drain fuel system completely or add a gasoline 

stabilizer to the fuel system. If you have chosen 
to use a fuel stabilizer and have not drained the 
fuel system, follow all safety instructions and 
storage precautions in this manual to prevent 
the possibility of fire from the ignition of gasoline 
fumes. Remember, gasoline fumes can travel to 
distant sources of ignition and ignite, causing risk 
of explosion and fire.

NOTE: Gasoline, if permitted to stand unused for 
extended periods (30 days or more), may develop 
gummy deposits which can adversely affect the 
engine carburetor and cause engine malfunction. To 
avoid this condition, add a gasoline stabilizer to the 
fuel tank and run the engine a few minutes, or drain 
all fuel from the unit before placing it in storage.

Starting After Long Term Storage

Before starting the unit after it has been stored for a 
long period of time, perform the following steps.

 1.  Remove any blocks from under the unit.

 2.  Install the battery if it was removed.

 3.  Unplug the exhaust outlet and air cleaner.

 4.  Fill the fuel tank with fresh gasoline. See engine 

manual for recommendations.

 5.  See engine owner’s manual and follow all 

instructions for preparing engine after storage.

 6.  Check crankcase oil level and add proper oil if 

necessary. If any condensation has developed 
during storage, drain crankcase oil and refill.

 7.  Inflate tires to proper pressure. Check fluid levels.

 8.  Start the engine and let it run slowly. DO NOT run 

at high speed immediately after starting. Be sure 
to run engine only outdoors or in well ventilated 
area.

WARNING

Fuel and its vapors are extremely 
flammable and explosive.

Fire or explosion can cause severe burns 
or death.

Never store the unit, with gasoline in the engine 
or fuel tank, in a heated shelter or in enclosed, 
poorly ventilated enclosures.  Gasoline fumes 
may reach an open flame, spark or pilot light 
(such as a furnace, water heater, clothes dryer, 
etc.) and cause an explosion.

Handle gasoline carefully.  It is highly 
flammable and careless use could return in 
serious fire damage to your person or property.

Drain fuel into an approved container outdoors 
away from open flame or sparks.

Not 

for  

Reproduction

Содержание 5900778

























































Отзывы: