background image

18

www.ferrisindustries.com

Operation

STORAGE

Temporary Storage (30 Days Or Less)

Remember, the fuel tank will still contain some gasoline, 
so never store the unit indoors or in any other area 
where fuel vapor could travel to any ignition source.  
Fuel vapor is also toxic if inhaled, so never store the unit 
in any structure used for human or animal habitation.

Here is a checklist of things to do when storing your unit 
temporarily or in between uses:

  •  Keep the unit in an area away from where children 

may come into contact with it. If there’s any chance 
of unauthorized use, remove the spark plug (s) and 
put in a safe place.  Be sure the spark plug opening 
is protected from foreign objects with a suitable 
cover.

  •  If the unit can’t be stored on a reasonable level 

surface, chock the wheels.

  •  Clean all grass and dirt from the mower.

Long Term Storage (Longer Than 30 
Days)

Before you store your unit for the off-season, read the 
Maintenance and Storage instructions in the Safety 
Rules section, then perform the following steps:

  •  Drain crankcase oil while engine is hot and refill with 

a grade of oil that will be required when unit is used 
again.

  •  Prepare the mower deck for storage as follows:

    a. Remove mower deck from the unit.

    b. Clean underside of mower deck.

    c. Coat all bare metal surfaces with paint or light coat 

of oil to prevent rusting.

  •  Clean external surfaces and engine.

  •  Prepare engine for storage. See engine owner’s     

manual.

  •  Clean any dirt or grass from cylinder head cooling 

fins, engine housing and air cleaner element.

  •  Cover air cleaner and exhaust outlet tightly with 

plastic or other waterproof material to keep out 
moisture, dirt and insects.

  •  Completely grease and oil unit as outlined in the 

Normal Care section.

  •  Clean up unit and apply paint or rust preventative to 

any areas where paint is chipped or damaged.

WARNING

Never store the unit, with gasoline in engine 
or fuel tank, in a heated shelter or in enclosed, 
poorly ventilated enclosures. Gasoline fumes 
may reach an open flame, spark or pilot light 
(such as a furnace, water heater, clothes dryer, 
etc.) and cause an explosion.

Handle gasoline carefully. It is highly 
flammable and careless use could result in 
serious fire damage to your person or property.

Drain fuel into an approved container outdoors 
away from open flame or sparks.

  •  Drain fuel system completely or add a gasoline 

stabilizer to the fuel system. If you have chosen 
to use a fuel stabilizer and have not drained the 
fuel system, follow all safety instructions and 
storage precautions in this manual to prevent 
the possibility of fire from the ignition of gasoline 
fumes. Remember, gasoline fumes can travel to 
distant sources of ignition and ignite, causing risk of 
explosion and fire.

NOTE: Gasoline, if permitted to stand unused for 
extended periods (30 days or more), may develop 
gummy deposits which can adversely affect the engine 
carburetor and cause engine malfunction. To avoid this 
condition, add a gasoline stabilizer to the fuel tank and 
run the engine a few minutes, or drain all fuel from the 
unit before placing it in storage.

STARTING AFTER  

 

 

LONG TERM STORAGE

Before starting the unit after it has been stored for a long 
period of time, perform the following steps.

  •  Remove any blocks from under the unit.

  •  Unplug the exhaust outlet and air cleaner.

  •  Fill the fuel tank with fresh gasoline. See engine   

manual for recommendations.

  •  See engine owner’s manual and follow all 

instructions for preparing engine after storage.

  •  Check crankcase oil level and add proper oil if         

necessary. If any condensation has developed 
during storage, drain crankcase oil and refill.

  •  Inflate tires to proper pressure. Check fluid levels.

  •  Start the engine and let it run slowly. DO NOT run at 

high speed immediately after starting. Be sure to run 
engine only outdoors or in well ventilated area.

Not 

for  

Reproduction

Содержание 5900545













































Отзывы: