89
Rev. 1.0
T380D-T430D
ROUTINE MAINTENANCE
07-MANUTENZIONE ORDINARIA
7 ROUTINE MAINTENANCE
Always wear safety footwear, overalls, safety gloves and, if necessary, earmuffs and a dust mask during
use and during machine maintenance, repair, handling and storage operations.
7.1 General information
The criteria for routine maintenance of the machine are provided below, based on the company’s experience and on
advice received from our customers.
These criteria are not exhaustive and may, therefore, be supplemented thanks to the collaboration of our
customers.
Good routine maintenance keeps down the operating costs of the machine and allows you to make the most of its
potential.
For specific repair or maintenance operations where it may be necessary to lift the machine from the ground or to tilt
it, always use proper tools, lifters or hoists that are appropriate for this purpose (see Chapter 4).
Always use authorised dealerships and workshops.
For the replacement of machine parts, use only genuine spare parts supplied by the Manufacturer or by authorised
dealers.
Before carrying out any type of maintenance:
1)
Wait until all moving parts come to a complete stop;
2)
Lower the machine to ground level;
3)
Disconnect the power takeoff;
4)
Switch off the engine of the tractor (or self-propelled machine);
5)
Apply the parking brake;
6)
Take out the ignition key;
7)
Get off the tractor to check the extent of the problem;
8)
Wait for the oil and the hot surfaces to cool down;
9)
Proceed with any interventions required on the machine.
WARNING
Содержание T380D left
