MT Owners Manual
4.4.2 Assembling the wheels (Figure 24):
(only for rear version machines)
Before assembling the wheels, the roller must be disassembled. Attach the wheel
holders (1) to the sides of the shredder using the screws (2). Insert the wheel and the
arm into the holder, attach with a pin (3) and secure them with the spring clips (4).
Adjust the height by moving the sector (5) and fixing it with the screws (6). Attach the
guard (7) to protect from the possible throwing of objects by the shredder. Always
remember to make the holes while assembling the guard.
Figure 24
Figure 25
Figure 26
15
NOTE: FIGURE 25
The assembling of wheels is possible in the position A, within the dimensions of the
shredder, when working in narrow spaces (vineyards, orchards), or externally to
these dimensions, in the position 8, when working in an open field.
IMPORTANT: In case of reverse motion, lift the shredder from the ground, or the
wheels could be broken (Figure 26).
