Cleaning the high-pressure nozzles
1. Remove the cleaning pin
4
from the back of the washer.
2. Use the cleaning pin to clean the high-pressure nozzles of the cleaning
attachments.
3. Re-insert the cleaning pin in the rear of the washer.
Storage
NOTE!
Risk of damage!
There is always some leftover water in the washer and the pump
that could result in damage to the washer.
- Do not store the washer at temperatures below the freezing
point, as this may result in frost damage.
- If you take the washer out of commission for a prolonged
period of time, empty the cleaner container and let the water
drain out of the high-pressure hose.
- Store the washer upright in a dry, well ventilated location
protected from access by children.
- Pay attention to the high net weight of the machine during
unpacking, transport and storage.
- Wind the high-pressure hose
2
using the hand crank
3
anticlockwise onto the hose reel.
- Secure the end of the hose with the hose clamp.
- Wind the mains cord
10
around the cord holder at the rear
side of the device.
- Store the accessory parts in the compartments provided for
this purpose (e.g. holder for the spray gun
6
) on the front
and rear side of the washer.
Cleaning and care
21