3. Check whether the washer or the individual parts exhibit damage. If any
damage is visible, do not use the washer. Contact the manufacturer at the
service address specified on the warranty card.
Assembling the washer
WARNING!
Rist of injury!
The washer could be inadvertently activated and cause injury.
- Ensure that the washer is disconnected from the mains before
you assemble the washer.
WARNING!
Health hazard!
The washer must not be directly connected to the drinking water
network because the return flow of water poses a risk to the
drinking water.
- Use a water backflow preventer or an inlet hose set approved
in accordance with IEC 61770.
- Cleaning car motors and other objects contaminated by oil
and various lubricants is permissible only on such areas
where the waste water is diverted by an oil separator.
- Water that has flowed through the backflow preventer is
considered unfit for drinking.
1. Insert the plug connection of the high-pressure hose
2
in the connection
12
on the handle of the spray gun
11
.
2. Insert any given cleaning nozzle onto the spray gun. See chapter “Using the
cleaning attachments”.
3. Connect a water inlet hose with a quick-lock coupling (not included in the
package contents) with the screw connection for the water inlet hose
7
. The
water temperature may amount to no more than 40 °C.
4. Insert the mains plug into a properly installed socket with an earthing contact
and alternating voltage in accordance with the washer’s rating plate.
Before first use
14