FERREX HL520, Руководство пользователя

Страница: 20 / 38

16 AFTER SALES SUPPORT

support@scheppach.com.au

1300 855 831
MODEL: HL520 PRODUCT CODE: 700726 04/2021
AUS Hotline Costs: Local rate for landline calls*
*Charges may vary dependent upon network operator or mobile network provider.
AUS
Safety regulations
• Wear suitable clothes. Never wear loose fitting clothes or jewelry.
Keep hair, clothes and gloves away from moving parts. Loose cloth-
ing, dangling jewelry and long hair can be caught by moving parts.
4. CAREFUL HANDLING AND USE OF ELECTRIC TOOLS
• Do not overload your tool. Only use suitable electric tools to perform
your work. Using the right electric tool allows you to work better and
safer within the tool’s quoted capacity range.
• Do not use an electric tool whose switch is defective. An electric
tool that no longer can be switched on or off is dangerous and must
be repaired.
• Always pull the plug out of the socket outlet before making any
adjustments, changing accessories, or storing power tools. This
precaution eliminates the possibility of inadvertently starting the tool.
• When not in use, store electric tools out of the reach of children. Do
not allow those persons to use this tool who are unfamiliar with it or
who have not read these instructions. Electric tools are dangerous
when they are used by inexperienced persons.
• Take good care of your tool. Check that moving parts properly func-
tion and do not jam, that parts are not broken off or damaged in any
way and that the tool can be used to its full capacity. Have damaged
parts repaired prior to using the tool. The cause of many accidents
can be traced back to poorly maintained electric tools.
• Use electric tools and plug-in tools, etc. in compliance with these
instructions and in the manner that is prescribed for the model at
hand. In so doing, pay due attention to working conditions and the
job to be performed. Using electric tools for applications other than
those intended can lead to dangerous situations.
• If the power cable of the electric tool is damaged, it must be re-
placed by a specially prepared connection lead which can be ob-
tained from the customer service center.
5. SERVICE
Have your tool repaired only by authorized specialists using original
replacement parts. This will ensure that your tool remains safe to use.