Use
19
button have locked into one of the four positions for the
inclination angle and the motor housing is securely in place.
− Do not use the grass trimmer if the motor housing is not
correctly set to one of the designated positions.
You can adjust the taper angle to four different positions.
Set the taper angle as follows:
1. Press the locking mechanism
12
on the motor housing
11
and keep it pressed
down (see
Fig. H
).
2. Set the desired inclination angle.
3. Release the locking mechanism, allowing the motor housing to snap back into
place.
4. Turn the motor housing a little further to check that the locking mechanism has
clicked into place.
Using the grass trimmer
WARNING!
Risk of injury and damage!
If grass, stones, hard objects or similar items are blocking the cutting
apparatus, injury or damage to the grass trimmer may result.
− If grass, stones, hard objects or similar items must be removed
from the cutting apparatus, immediately switch off the grass
trimmer and remove the battery.
− Wait until the cutting unit has come to a complete stop, then
carefully remove the debris.
− Wear protective gloves for this.
Approach the grass with the grass trimmer only once the grass trimmer
has been switched on.
1. Insert the battery into the grass trimmer as described in the chapter “Inserting and
removing the battery”.
2. Switch on the grass trimmer by depressing the switch lock
2
into the handle
while at the same time pressing the On/Off switch
3
(see
Fig. A
).
Hold down the On/Off switch.
3. Approach the grass with the grass trimmer.
