manualshive.com logo in svg

FERREX 705551, Руководство пользователя

Поделиться
Скачать
FERREX 705551 Скачать руководство пользователя страница 40

Kapitelüberschrift

44

the chain bar. Lubrication is possible during work, with the engine switched off.

m

 CAUTION

Wear heavy duty work gloves when handling the bar and chain.

Most guide bar problems can be prevented merely by keeping the chainsaw well 
maintained. Insufficient guide bar lubrication and operating the saw with a chain 
that is 

TOO TIGHT will contribute to rapid bar wear. To help minimize bar wear, the 

following guide bar maintenance procedures are recommended.

m

 CAUTION

Always wear protective gloves during maintenance operations.  
Do not carry out maintenance when the engine is hot.

Turning the chain bar
The bar should be reversed every 8 working hours to ensure uniform wear.  
Remove the complete side cover,chain bar and chain by loosening the bar fastening 
wheel (14) completely.  
Keep the bar groove and lubrication hole clean (Fig. 28).
Check the bar rails frequently for wear and, if necessary, remove the burrs and 
square-up the rails using a flat file (Not supplied).
Remount the the chain bar (reversed side), chain and side cover.

m

 CAUTION

Never fit a new chain to a worn chain bar.

CHAIN MAINTENANCE

Chain sharpening
Chain sharpening requires special tools to ensure that cutters are sharpened at the 
correct angle and depth. For the inexperienced chainsaw user, we recommend that 
the saw chain be professionally sharpened by the nearest professional Service Cen-
tre. If you feel comfortable sharpening your own saw chain, special tools are availa-
ble from the professional Service Centre.
Sharpen the chain using protective gloves. After sharpening, the cutting links must 
all have the same width and length. 

Maintenance and servicing

Содержание 705551



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды