FERREX 705551 страница 48 Скачать руководство пользователя

Страница: 48 / 50

Kapitelüberschrift

Poor performance

when operated

Blunt chain.

Loose chain.

Sharpen or replace the chain.

Tension the chain.

Engine dies

Empty petrol tank.

Fuel filter in the

wrong position in the

tank.

Fill up the petrol tank.

Completely fill the petrol tank or

re-position the fuel filter in the petrol

tank.

Insufficient chain

lubrication

(the cutter rail and

chain get hot)

Empty oil tank for the

chain.

Top up the oil tank for the chain.

Oil lubrication open-

ings moved.

Clean the oil lubrication hole in the

cutter bar.

Clean the groove in the cutter bar.

Service information
Please note that the following parts of this product are subject to normal or natural
wear and that the following parts are therefore also required for use as consumables.

Wear parts*

Saw chain, Chain bar, Saw chain-oil, Motor-oil,

Spiked bumper, Chain catcher, Spark plug, Air filter,

Fuel filter, Saw chain-oil filter

To order spare parts, use the spare part drawing of this manual.

* Not necessarily included in the scope of delivery!

Admitted saw chain and chain bar combination

Saw chain

3/8LP-57

Guide bar

AP16-57-507P

Troubleshooting

Содержание 705551



















































Результаты поиска

Содержание 705551

Отзывы:

Похожие инструкции для 705551

Бренды по названию

Популярные бренды

FERREX 705551, Руководство пользователя

Результаты поиска

Содержание 705551

Отзывы:

Похожие инструкции для 705551

Бренды по названию

Популярные бренды