FERREX 25CC Скачать руководство пользователя страница 14

Страница: 14 / 54

Kapitelüberschrift

Fuels / Refuelling

• When refuelling the chain saw the engine must be switched off.

• Smoking and open fire are not permitted.

• Before refuelling allow the machine to cool down fully.

• Fuels might contain solvent-like substances. Avoid skin and eye contact

with mineral oil products.

Always wear protective gloves while refuelling. Often change and clean

your protective clothing. Do not inhale fuel vapours. Inhaling fuel vapours

might cause physical harm.

• Be careful not to spill fuel or chain oil. Immediately clean the chain saw if

fuel or chain oil has been spilled. Keep away fuel from clothing. Immediate-

ly change your clothing if fuel has been spilled on it.

• Make sure not to spill fuel or chain oil into the soil (environmental protec-

tion). Use a proper base.

• Do not refuel in closed rooms. Fuel vapours accumulate at the soil (risk of

explosion).

• Tighten the tank cap as far as it will go.

• Move the chain saw at least 10 feet (3 m) from the fueling point before start-

ing the engine.

• Fuels have a limited storage life. Only buy that amount which will be used

in measurable period.

• Store and transport fuel and chain oil only in proper containers. Keep fuel

and chain oil away from children.

Putting into operation

• Do not work alone. Keep within calling distance of other in case of in-

jury.

• Ensure that no children or other persons stay close to you and the opera-

tional range of the saw. Pay also attention to animals.

• Prior to starting the work or if the chainsaw falls down, check to en-

sure smooth function and correct, safe operating condition!

In par-

ticular check the function of the chain brake, correctly mounted chain bar,

properly sharpened and tensioned saw chain, firmly attached chain sprock-

et guard, free movement of the throttle lever and the function of the throt-

tle lever lock, clean and dry handles, the function of the start/stop switch.

• Do not start the saw until it has been completely assembled and inspected.

In principle the saw can only be operated when completely and securely as-

sembled!

Safety regulations

Содержание 25CC























































Результаты поиска

Содержание 25CC

Отзывы:

Похожие инструкции для 25CC

Бренды по названию

Популярные бренды

FERREX 25CC, Руководство пользователя

Результаты поиска

Содержание 25CC

Отзывы:

Похожие инструкции для 25CC

Бренды по названию

Популярные бренды