Ferport CB 8221 L, Инструкции по эксплуатации и монтажу

Страница: 14 / 24

14
TERMINAL BLOCK M4
29 Radio recelver 2 nd channel output
30 Radio recelver 2 nd channel output
MAX 1A x 24V
29 30
CH2
TERMINAL BLOCK M6
31 Courtesy light interference-free contact 800W Max
32 Courtesy light interference-free contact 800W Max
31 32
Luce cortesia
1K
TERMINAL BLOCK M5
33 + LED
34 - LED
33 34
1 K Ω
LED
ELECTRICAL GEAR
TRIMMER T1 controls the engine voltage between 120 V and 230 V.
This function is automatically operated about 3 seconds after the engines start up and designed to provide the maximum power.
STATUS LED
In order to check the status of the gate a LED can be connected with a 1 KOhm resistor in series. The LED’s cathode (short pin)
is to be connected to the negative end (terminal 34), while the resistor can be mounted elther on terminal 33 or 34.
ELECTRICAL LOCK RELEASE
When the open signal is transmitted the terminal board provedes a temporery close pulse to the wings in order to ease the electrical
lock release.
This function can be cut off with the DIP 3 swtich.
ENGLISH