Ferplast EXPLORALIGHT 15W T8, Руководство пользователя

Страница: 8 / 28

EXPLORALIGHT: overtank lamp for terrariums
6 English
Preliminary Operations
For your safety, please read the instructions below carefully before
performing maintenance operations of any kind.
• Check that the voltage requirements of appliance correspond to
the power supply voltage.
• This product is intended for indoor use.
• Ensure that your home is protected by a differential safety switch
with a tripping current of no more than 30mA.
• Do not connect the product to the power supply before completing
all installation operations.
• Disconnect the electrical appliance from the power supply before
performing maintenance operations of any kind.
• Connect the plug to the power supply, leaving a loop in the cable
below the socket to prevent drops of water from reaching the
power supply (
Fig. 1 ).
• Remember that water and dust protection levels are ensured
only if the lamps have been inserted and the ring nuts have been
perfectly tightened.
• If the power supply cable is damaged, the entire appliance must
be replaced.
• Any extraordinary maintenance must be performed by qualified
personnel.
Fig. 1
Important:
• “ Qualified personnel ” means a qualified technician
registered in the Roll of Installers.
• “ Extraordinary maintenance ” means any kind
of maintenance not included in the section
“Maintenance”.
Features
Brackets
EXPLORALIGHT overtank lamps come with 2 painted metal
brackets (non-toxic moisture-resistant paint) complete with
suction pads for installing the device above the terrarium
(
Fig. 2 ).
Electronic power supply
The electronic power supply, with fluorescent lamps and
parabolic reflector dish, ensures sufficient light in the
terrarium and maximum safety and simplicity of use and
maintenance.
• Energy saving in accordance with the 2000/55 European
Directive on use of appliances with low energy
consumption.
• Increased durability of the lamps.
• More stable light: more similar to sunlight (absence of the
typical flickering of traditional lighting).
• Greater quality of lighting, which remains constant almost
up to the end of lamp life.
• Lower temperatures: the electronic power supply disperses
little heat.
• Increased safety: when the lamp is at the end of its life,
a sophisticated electronic protection system removes
the electrical current and places the appliance in safety
conditions.
• Lighter in weight: electronic power supplies weigh much
less.
C
E
D
B
A
Fig. 2
A Metal brackets
B Suction pads
C Anti-reflection plate
D Watertight lamp holder
E Reflective
sheets