manualshive.com logo in svg

Ferno PROFlexX, Руководство пользователя

Продукт Ferno PROFlexX - это инновационная модель носилок, предназначенная для транспортировки пациентов. Чтобы узнать подробную информацию о данном изделии, скачайте бесплатное руководство по эксплуатации на нашем сайте. Посетите manualshive.com, чтобы загрузить руководство пользователя прямо сейчас!

Поделиться
Скачать
background image

8

© Ferno-Washington, Inc.   234-3346-00   March  2006

PRO

Flex

X

® 

 Series

3 - ABOUT THE COT

3.1 Cot Description

The Ferno

®

 PROFlexX

®

 Series cot (called the cot in this

manual) is an emergency patient-handling device designed
to transport a patient in a ground-based ambulance. The
cot is for professional use by a minimum of two trained
operators. It is designed for roll-in loading to help reduce
the risk of back injury to medical service personnel.
The PROFlexX cot is designed for use with the Ferno

®

Model 175 series cot fasteners (not included). The cot
is shipped with a safety hook, low-profile mounting
block and short turn-knob. The PROFlexX-ST cot is
designed for use with the Ferno

®

 Stat Trac series cot

fasteners (not included).
Cot features include:

• Clear anodized  handling surfaces keep hands and

clothing clean

• Choice of colors
• 8 Height positions
• Two loading positions for vehicle floors 28"-33"
• Pneumatic backrest
• Shock frame
• Swing-down sidearms OR Ferno

®

 Universal sidearms

that fold flat or swing down

• Lead handle at foot end
• Four 6-inch U-tread swivel transport wheels
• 2 Wheel locks
• 2 Telescoping side lift handles
• 5-Position head-end drop frame
• Set of restraints
• Locking mattress
• Head-end leg protectors
• Lower frame scuff strips

AMBULANCE INFORMATION

The ambulance bumper extension should not exceed
14 inches. The patient compartment should have a level
floor large enough for the folded cot, and a Ferno

®

 cot

fastener installed (not included). See 

Cot and Fastener

Compatibility, 

page 6.

The cot is for use with ambulances that meet the
requirements of the Federal Ambulance Specification
KKK-A-1822. For information:

Federal Supply Services, Specifications Section
Suite 8100
470 E. L’Enfant Plaza, SW
Washington, DC 20407

About the Cot

3.2 General Specifications

Height

1

Bed Position 8 .......................................... 39 in/98 cm

   Loading Position 2

..............................

31 in/79 cm

Bed Position 7 .......................................... 37 in/93 cm

   Loading Position 1

..............................

27 in/69 cm

Bed Position 6 .......................................... 34 in/87 cm
Bed Position 5 .......................................... 31 in/79 cm
Bed Position 4 .......................................... 28 in/71 cm
Bed Position 3 .......................................... 24 in/62 cm
Bed Position 2 .......................................... 20 in/51 cm
Bed Position 1 (folded) ............................ 14 in/35 cm

Length

     Maximum .......................................... 78 in/199 cm
     Minimum ........................................... 64 in/162 cm

Width

 (Overall) ....................................... 24 in/61 cm

Weight

2

......................................................92 lb/42 kg

Weight (ST)

2

...........................................100 lb/45 kg

Strength to Weight Ratio

3

......................... 7.6 SWR

Strength to Weight Ratio

3

 (ST)

................ 7.0 SWR

Load Limit

............................................700 lb/317 kg

Bariatric Load Limit

4

.......................1,100 lb/500 kg

General specifications are rounded to the nearest whole number.
Metric conversions are calculated before rounding the Imperial
measurements. For more information, contact Ferno Customer
Relations (page 38) or your Ferno distributor.

Ferno reserves the right to change specifications without notice.

1

Height measurements are as follows: Loading Position is

the distance from the ground to the bottom of the loading
wheel. Bed Position is the distance from the ground to the
patient surface at the telescoping handle (See page 10).

2

Weight is without mattress, restraints, and optional features.

3

Strength to Weight Ratio is the load limit of the cot divided

by the cot’s weight.

4

Bariatric transport requires special operating procedures.

See pages 29-31.

Improper use of the cot can cause injury. Use
the cot only for the purpose described in this
manual.

WARNING

!

Содержание PROFlexX








































Отзывы:

Нет отзывов

Похожие инструкции для PROFlexX

vanEE AI Series User'S And Installer'S Manual preview
AI Series
Бренд: vanEE Страницы: 52
Caddon Hives WBC Assembly Instructions preview
WBC
Бренд: Caddon Hives Страницы: 3
Yamaha QX1 Owner'S Manual preview
QX1
Бренд: Yamaha Страницы: 46
Maeda MC-174CRM Operation Manual preview
MC-174CRM
Бренд: Maeda Страницы: 276
MAGIC FX CO2JET II User And Installation Manual preview
CO2JET II
Бренд: MAGIC FX Страницы: 25
TATU PT Operator'S Manual preview
PT
Бренд: TATU Страницы: 30
Rane HC6S Operator'S Manual preview
HC6S
Бренд: Rane Страницы: 4
Sabio 2010D Operation Manual preview
2010D
Бренд: Sabio Страницы: 182
ProLights HZ900D User Manual preview
HZ900D
Бренд: ProLights Страницы: 28
GE 60105LO Instructions preview
60105LO
Бренд: GE Страницы: 2
Raytec RL F 25 Installation Manual preview
RL F 25
Бренд: Raytec Страницы: 8
Zafferano pencil Instructions For Use Manual preview
pencil
Бренд: Zafferano Страницы: 28
Basler 9 1661 00 100 Instruction Manual preview
9 1661 00 100
Бренд: Basler Страницы: 33
Elma Elmasonic P Operating Instructions Manual preview
Elmasonic P
Бренд: Elma Страницы: 35
Qtx DMX-192 User Manual preview
DMX-192
Бренд: Qtx Страницы: 6
Jäger Z62-M260.23 S5 Manual preview
Z62-M260.23 S5
Бренд: Jäger Страницы: 36
IMG STAGE LINE LSE-12RG Instruction Manual preview
LSE-12RG
Бренд: IMG STAGE LINE Страницы: 12
Metrohm 776 Dosimat Instructions For Use Manual preview
776 Dosimat
Бренд: Metrohm Страницы: 42

Бренды по названию

Популярные бренды

Загрузить еще бренды