manualshive.com logo in svg

Ferno POWERFlexx, Руководство пользователя

Поделиться
Скачать
Ferno POWERFlexx Скачать руководство пользователя страница 36

36

© Ferno-Washington, Inc.   234-3310-01  May 2005

POWERFlexx

™

Maintenance

9.9 Charging the Batteries

BATTERY LIFE

The cot can be powered through an average of 50 cycles
before the batteries require recharging. Patient weight
and extreme temperatures affect the number of cycles.

The rate of speed for raising and lowering the cot is
faster when the batteries are fully charged.

The batteries do not have a “memory” and do not need
to be discharged before recharging. Recharge the
batteries as often as possible. Charge the batteries for
3 hours minimum for a full charge.

If the batteries are providing significantly fewer cycles
than normal, replace the batteries or power pack. See

Accessories and Related Products, 

page 40.

TO CHARGE THE BATTERIES:

The power pack module may be charged while it is
connected to the cot or while separate from the cot
(Figure 43 or Figure 44).

1. Connect the battery charger power cord (Figure

42) to a wall outlet. The green indicator on the
charger will light.

2. Plug the charging cord into the port marked, “24

VDC Charging Port” on the power pack module.

3. Charge the batteries 3 hours minimum for a full

charge.

4. Disconnect the charger from the power pack

module before using the cot.

Figure 44 - Charger Connected to

Power Pack

Figure 43 - Charger Connected

to Power Pack Module On Cot

Important

Disconnect the charger before using the cot.
Failure to disconnect the charger can damage
the charging cord, charger, or power pack.

Figure 42 - Battery Charger

Charging Cord

Power Cord

Charging

Indicator Light

Содержание POWERFlexx













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды