manualshive.com logo in svg

Ferno POWERFlexx, Руководство пользователя

Поделиться
Скачать
Ferno POWERFlexx Скачать руководство пользователя страница 33

POWERFlexx

™

© Ferno-Washington, Inc.   234-3310-01  May 2005

33

9.4 Disinfecting the Cot

Wipe all surfaces with disinfectant. Follow the
disinfectant manufacturer’s directions. Ferno
recommends you inspect the cot for damage as you
disinfect it.

9 - MAINTENANCE

Maintenance

Important

Disinfectants and cleaners containing bleach,
phenolics, or iodines can cause damage.
Disinfect and clean only with products that do
not contain these chemicals.

9.1 Maintenance Schedule

The cot requires regular maintenance. Set up and follow
a maintenance schedule. A sample maintenance record
sheet is provided on page 43. The table at right
represents minimum intervals for maintenance.

When using maintenance products, follow the
manufacturers’ directions and read the manufacturers’
material safety data sheets. You can purchase a
recommended disinfectant from your Ferno distributor
or Ferno Customer Relations (page 41).

Improper maintenance can cause injury.
Maintain the cot only as described in this
manual.

WARNING

!

Each Month

As Needed

Each Use

•

•

Disinfecting 

(pages 33-34)

Cleaning 

(pages 33-34)

Waxing 

(page 34)

Inspecting 

(page 34)

Lubricating

 (page 35)

Charging Batteries

 (page 36)

•

•

•

•

Minimum

Maintenance Intervals

•

9.2 Disinfecting and Cleaning

the Restraints

Remove restraints from the cot. Disinfect and clean only
as directed in the restraint users’ manuals provided with
the restraints. Additional, free manuals can be ordered
from Ferno Customer Relations (page 41).

9.3 Disinfecting and Cleaning

the Mattress

1. Remove the mattress from the cot.

2. To disinfect, wipe the mattress with disinfectant,

following the manufacturer’s instructions.

3. Wash the mattress with warm, soapy water and a

soft cloth.

4. Rinse the mattress with clear water.

5. Hang to dry or dry with a towel.

Содержание POWERFlexx













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды