Ferno Mini Cot Скачать руководство пользователя страница 9

© Ferno-Washington, Inc.   234-3413-00   June 2009 

9

Mini Cot

Using the Features

Figure 5 - Safety-Lock Lever

4.2  Safety Lock 

The safety lock is engaged by default. This prevents 

● 

the cot legs from folding. 
The safety lock must be manually disengaged in order 

to operate the leg-control handles, which allow the cot 

legs to fold as the cot is loaded into a vehicle.)
The safety lock lever is located on the operator's right 

● 

side on the main frame of the cot (Figure 5).

To disengage the safety lock:

● 

 Press the safety-lock  

lever IN as instructed on the lever label. For proper 

use of the safety lock , see 

complete   instructions in 

Transferring  the  Body 

onto the Cot

, page 11, and 

Loading the Cot, 

pages 13 and 14.

Important

A disengaged safety lock can allow the cot legs to fold 

unexpectedly. When unloading the cot from a vehicle, 

confirm that the safety lock is engaged before rolling 

the cot loading wheels off the vehicle floor. 

4.3  Leg-Control handles

The front and rear legs of the Mini Cot have separate 

● 

control handles. Squeezing the front- or rear-leg control 

handle  at  the  correct  point  in  the  loading  procedure 

allows  the  cot  legs  to  fold  independently and  in  the 

proper sequence  while the cot is being loaded into a 

vehicle.
The leg-control handles are located at the operator end 

● 

of the cot (Figure 6).
Labels  on  the  leg-control 

● 

handles  remind  operators  that 

squeezing the right-hand control 

handle  allows  the  front  legs  to 

fold,    and  squeezing  the  left-

hand  control  handle  allows  the 

rear  legs  to  fold.  For  complete 

loading  instructions,  see 

Loading  the  Cot,

  pages  13 

and 14.

Figure 6 - Control Handles

Rear-Leg 

Control Handle

Front-Leg 

Control Handle

Rear-Leg 

Control Label

Front-Leg 

Control Label

 

WarNING

Squeezing  the  control  handles  while  UNLoaDING 

the cot will prevent the legs from locking and will 

allow the cot to fold. Grasp only the cot main frame, 

not the handles, while unloading the cot.

Safety-Lock 

Lever

The safety lock must be disengaged in order to operate 

● 

the  control  handles. 

See  Loading  the  Cot

,  pages  13 

and 14, for complete loading instructions.  
Do 

● 

not

  squeeze  the  leg-control  handles  while 

unloading

  the  cot.  Squeezing  a  control  handle 

during the unloading procedure will prevent the legs 

controlled by that handle from locking into position, 

which could cause the cot to fold unexpectedly.

Содержание Mini Cot
























Отзывы: