Ferno Mini Cot Скачать руководство пользователя страница 11

© Ferno-Washington, Inc.   234-3413-00   June 2009 

11

Mini Cot

Using the Cot

5 - USING the Cot

5.1  before Placing the Cot in Service

Personnel who will work with the cot need to read this 

● 

manual and be trained in the cot's use.
Attach the restraints to the cot (see the restraint users' 

● 

manual and page 10 of this manual). 

Confirm that the cot operates properly. See 

● 

Inspecting 

the Cot

, page 18.

Install  a  cot  fastener  in  the  vehicle  that  will  be 

● 

transporting the cot. The cot is designed for use with 

the Ferno

®

 Model 579 Fastener (not included).

5.2  General Guidelines for Use

Maintain control of the cot at all times.

● 

It  is  the  cot  operator's  responsibility  to  ensure  safe 

● 

handling practices for the body and the cot.
The cot is for professional use by one or more trained 

● 

operators.
Follow  standard  mortuary-services  procedures  for 

● 

body handling when using the cot.
Always use restraints to secure the body on the cot.

● 

Lift  only  the  weight  you  can  safely  handle.  Use 

● 

additional  help  when  working  with  heavy  loads  or 

raising  the  loaded  cot  from  the  folded  position  (see

 

Using Additional Help

, page 12). 

Read the  

Users’ Manual

General Warning of 

Potential Injury

Do Not Exceed 

the Cot Load 

Limit

5.3  Folding the empty Cot

If you need to retrieve a body from the floor or ground, you 

can fold the empty cot. (You will need a helper when raising 

the cot after it is loaded. See 

Raising the Cot with a Body on 

It

, page 12). To lower the empty cot:

Place the cot beside the body. 

1. 

Disengage the safety lock.

2. 

Tip the cot onto its loading wheels and front transport 

3. 

wheels, placing your foot on the cross tube as shown 

in  Figure  9.  Use  your  foot  to  control  the  move  and 

ensure that the cot contacts the floor softly.

Squeeze  both  control  handles  and  lower  the  control 

4. 

end of the cot to the floor.

Unfasten the restraints and arrange the straps so they 

5. 

will not interfere with the transfer.

Cot May Be 

Operated by One 

Trained Operator

Symbols Used in This Manual

R

 

WarNING

Improper  operation  can  cause  injury.  operate  the 

cot only as described in this manual.

 

WarNING

an  unrestrained  body  can  fall  off  the  cot.  Use 

restraints to secure the body on the cot.

Figure 9 - Folding the Empty Cot

300 lb

136 kg

Содержание Mini Cot
























Отзывы: