Ferno CCT Six-P, Руководство пользователя

Страница: 13 / 22

FERNO/MAN/1121/162-R10/UK Page 12
5. Trolley Features
Leg Rest Features
The following features must be executed with the operator positioned at the
foot end of the trolley.
Trendelenburg Position
To raise the leg rest to the Trendelenburg position, grip and support the leg rest
frame at the foot end. Lift the leg rest until the support bar locks into position.
Maintain a grip on the frame and gradually reduce support of the leg rest until you are
confident that the support bar has locked.
To lower the leg rest from the Trendelenburg position, hold the leg rest frame at both
sides at the foot end . Slide hands forward until fingers contact the support bar on
the underside of the leg rest frame. At this point, simultaneously lift and move the
support bar forward, thus releasing same from its locked position and slowly lower
the leg rest frame to its resting position.
Knee Contour (Fowler) Position
To raise the knee contour position, hold both lifting straps (yellow) and lift up.
Gradually release the lifting straps, ensuring that the support bar has locked in
position. This procedure may be performed more easily with the cot sides lowered.
To lower the knee contour position, hold both release straps (red), lift up and pull
straps in the direction of the foot end and slowly lower the frame to its resting
position.
NOTE:
Potential pinch point - care should be taken during operation
NOTE:
Potential pinch point - care should be taken during operation