manualshive.com logo in svg

Ferno CCT Six - M, Руководство пользователя

Поделиться
Скачать
Ferno CCT Six - M Скачать руководство пользователя страница 2

FERNO/MAN/1121/177-R04/UK  

Page 

1

 

1. Intended 

Use 

of CCT Six-M  

 
The CCT Six-M is intended for use by fully qualified, trained and competent carers, 
attendants, paramedics or other such medical staff as an aid to provide safe and secure 
transportation of patients. 
 
The CCT Six-M is a fixed height trolley and its intended use is for the transportation of 
critically ill patients. The CCT Six-M also provides the facility and storage for ancillary 
equipment on a fixed base tray and drawers. 
 
The CCT Six-M is provided with an added facility that allows the top lying area to be 
widened to suit the larger patient. 
 

WARNING – Although the CCT Six-M is designed to fit into a vehicle that has a 
Ferno CEN two-part locking device provided for securing the Ferno Falcon Six or 
Pegasus Six Trolleys it should be noted that the CCT Six-M’s fixed height is higher 
than that of the Falcon transport height.  Furthermore, the stability of the trolley 
within the locking device could be affected by the addition of care equipment, this 
equipment should be equally spaced about the trolley, whenever possible. 
 

Combining different manufacturers’ products into a “mixed-component” trolley/fastener 
system can increase the user’s risk of injury and damage if not checked first for 
compatibility. 
 
However, Ferno trolleys are designed to be compatible with either the Ferno range of Two-
part locking devices or competitors equivalent locking devices, giving you full compatibility 
and interchangeability across your fleet. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
Contact Details 

 

Ferno (UK) Ltd. 
Ferno House, Stubs Beck Lane, 
Cleckheaton, West Yorkshire, BD19 4TZ 
United Kingdom 
+44 (0) 1274 851999

 

Ferno S.R.L. 
Via B. Zallone n.26, 
40066 Pieve di Cento, Bologna 
Italy 
+39 051 6860028

 

 

 

 

 

Содержание CCT Six - M

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды