Ferno CCT Six - M Скачать руководство пользователя страница 10

Страница: 10 / 24

FERNO/MAN/1121/177-R04/UK

Page

2-Part Track-Mounted Floor Lock (255-mm Gauge Unwin System)

255

GAUGE

TRACKING

FOOT

END

HEAD

END

FRONT OF

VEHICLE

HEAD END

FLOOR LOCK

POSITION OF RH LOCKING

DEVICES ADJUSTABLE

PERMANENT

POSITIONAL

GUIDE PLATE

PERMANENT POSITIONAL

GUIDE PLATE

FOOT END

FLOOR LOCK

VEHICLE OFFSIDE WALL

TROLLEY

1 Removal of Head End and Foot End Lock Assemblies



On each Unwin locking device, rotate the plunger

crossbar and turret anticlockwise a quarter of a turn.
Lift the plunger crossbar from its U-slot in the turret and
rotate it slightly to rest it on top of the turret.



Remove the assembly from the tracking by sliding the

assembly along the track half a hole pitch (12-13 mm)
and lifting clear.

2 Installation of Head End Lock Assembly



On each Unwin locking device, rotate the plunger crossbar until it snaps into the U-

slot on the turret (diagram

below). Do not rotate the turret clockwise at this stage.



Close to the positional guide plate fitted to the vehicle floor between the tracking at

the head end, engage the pegs on the underside of the lock assembly in the
tracking (diagram



Slide the assembly towards its required position until both plungers locate in the

track.



For each of the two Unwin devices, use the plunger crossbar to rotate the turret

clockwise a quarter of a turn (diagram

). The assembly will be locked rigidly to the

tracking.



Test for security and safety.

TRACKING



DEVICE LOCKED

PEGS

3 Installation of Foot End Lock Assembly

Install foot end lock assembly in exactly the same way as above adjacent to the positional
guide plate at the foot end.

DEVICE UNLOCKED

Содержание CCT Six - M

























Результаты поиска

Содержание CCT Six - M

Отзывы:

Бренды по названию

Популярные бренды

Ferno CCT Six - M, Руководство пользователя

Результаты поиска

Содержание CCT Six - M

Отзывы:

Бренды по названию

Популярные бренды