Ferno 59T EZ Glide Скачать руководство пользователя страница 27

Страница: 27 / 32

59T EZ

Glide®

6. There are two methods for checking belt tension.

You can use whichever method you prefer, but do

not use the chair position from one method with the

measurement range from the other method.
Use Method 1 (below, left) if the chair is laying on its

tracks on a workbench. Use Method 2 (below, right) if

the chair is standing on its wheels.

7. It may be necessary to repeat the tensioning and

measuring one or more times to achieve the correct

belt tension.

When the belt tension is correct, finish tightening the

bolt and nut to maintain the tension.

9. Repeat Steps 3-7 to adjust the tension of the other

track belt.

Method 2

Chair MUsT bE sTanDinG On iTs WhEEls

Grasp the belt at the track midpoint and pull the belt

away from the track to remove any slack, then measure

the distance between the exposed surface of the track

and the inner surface of the belt. Take the measurement

at the track midpoint.
The belt is correctly tensioned when the measurement

from the exposed surface of the track to the inner

surface of the belt is 3/4 in. to 1 in. (19 mm to 25 mm)

as in Figure 35.

Method 1

Chair MUsT bE layinG On iTs TraCks

On a WOrkbEnCh

Grasp the belt at the track midpoint and pull the belt

away from the track to remove any slack, then measure

the distance between the exposed surface of the track

and the inner surface of the belt. Take the measurement

at the track midpoint.
The belt is correctly tensioned when the measurement

from the exposed surface of the track to the inner

surface of the belt is 1-1/4 in. to 1-1/2 in. (31.75 mm to

38 mm), as shown in Figure 34.

Figure 34 - Checking Tension with Chair

Laying on Its Tracks on a Workbench

Figure 35 - Checking Tension with Chair

Standing on Its Wheels

Maintenance

Содержание 59T EZ Glide

































Результаты поиска

Содержание 59T EZ Glide

Отзывы:

Бренды по названию

Популярные бренды

Ferno 59T EZ Glide, Руководство пользователя

Результаты поиска

Содержание 59T EZ Glide

Отзывы:

Бренды по названию

Популярные бренды