Ferno 35A-NM Скачать руководство пользователя страница 6

Страница: 6 / 32

Model 35A-NM

1.7 MR Conditional

Testing and Compliance

TESTING

The Ferno

Model 35A-NM cot has been tested and is listed

as “MR Conditional”.
A product that is Magnetic-Resonance Conditional (called

MR Conditional in this manual and on product labeling)

has been shown to pose no hazards in a specified MR

environment under listed conditions.

LISTED CONDITIONS OF USE

The Ferno

Model 35A-NM cot has undergone testing and

has been determined to be MR Conditional. In general, the

cot is intended for use under the conditions listed here:

●

Static magnetic field of 3-Tesla or less

●

Spatial gradient magnetic field of 720-Gauss/cm

or less

●

Inside the MR environment (e.g., in the MR system

room, close to the scanner)

The cot is not designed or designated for use directly

inside the MR system (e.g., inside the bore of the scanner).

Magnetic-Resonance Rating Label

Safety Information

FERNO COMPLIANCE

Ferno adheres to the ASTM International classification and

definitions found in the following document:

The American Society for Testing and Materials

(ASTM) International, Designation: F2503-05,

Standard Practice for Marking Medical Devices and

Other Items for Safety in the Magnetic Resonance

Environments.

[Published August, 2005]

Non-clinical magnetic field interaction testing has been

conducted by an independent, third-party testing service.

ASTM Contact Information

ASTM International

100 Barr Harbor Drive

P.O. Box C700

West Conshohocken, PA 19428-2959, USA
Internet: www.astm.org

Содержание 35A-NM

































Результаты поиска

Содержание 35A-NM

Отзывы:

Бренды по названию

Популярные бренды

Ferno 35A-NM, Руководство пользователя

Результаты поиска

Содержание 35A-NM

Отзывы:

Бренды по названию

Популярные бренды