Ferno 35A-NM Скачать руководство пользователя страница 15

Страница: 15 / 32

Model 35A-NM

Using the Features

5.3 Adjustable Backrest

●

Purpose:

The backrest allows the patient’s torso to be elevated for

comfort or for medical necessity. The backrest has a flat position and

seven raised positions.

●

Before Use:

○

Loosen or unbuckle the torso restraint.

○

Support the weight of the backrest and patient.

●

Use:

○

To raise the backrest from the flat position

to the first raised

position, grasp the backrest frame and lift. When the backrest has

locked into position, release your grasp on the backrest frame.

○

To raise or lower the backrest from any other position,

use one

hand to support and raise/lower the backrest while you squeeze and

hold the adjustment lever with the other hand (Figure 13). When the

backrest is at the desired height, release the adjustment lever and raise

or lower the backrest to verify that it has locked into the new position.

●

After Use:

Buckle and/or adjust the torso restraint.

Figure 15 - Wheel Lock

Figure 13 - Using the Backrest

Squeeze to

Unlock

5.5 Wheel Locks

●

Purpose:

The wheel locks help keep the cot stationary during patient

transfer and certain medical procedures. When engaged, the wheel lock

stops wheel rotation.

●

Location:

All four transport wheels have wheel locks.

●

Use

(Figure 15)

○

To engage:

The trailing end of the lock lever is marked with the

word “ON”; press this end of the lever to engage the lock.

○

To disengage:

The shank-end of the lever is marked with the word

“OFF”. Press this end of the lever to disengage the wheel lock.

○

Wheel locks are

NOT

brakes. Engage the wheel locks only when

the cot is stationary. Stay with the cot and maintain control of it at

all times. Do not leave the patient unattended.

Figure 14 - Releasing the Sidearm Lock

5.4 Sidearms

●

Purpose:

Sidearms provide patient security and comfort. Keep the

sidearms raised except when transferring a patient to or from the cot.

●

Use:

○

To lower,

pull the

locking-pin knob

(Figure 14) and

swing the sidearm

down.

○

To raise,

lift the

sidearm until it

locks. You do not need to use the locking-pin knob.

Important

Do not use the sidearms to lift the cot.

Sidearms are not designed for lifting. Lift

the cot only by grasping the main frame.

Important

An unlocked backrest can cause injury.

Support the backrest frame until the

backrest locks into position.

Содержание 35A-NM

































Результаты поиска

Содержание 35A-NM

Отзывы:

Бренды по названию

Популярные бренды

Ferno 35A-NM, Руководство пользователя

Результаты поиска

Содержание 35A-NM

Отзывы:

Бренды по названию

Популярные бренды