Ferno 21-00034, Руководство пользователя и по обслуживанию, Страница: 25 / 40

25
Tirol Kit
© Ferno s.r.l. Rel.30092022 ENG.
NOTE:
if the lever can’t be completely closed, slightly
loosen the wheel locking pin until it can be correctly
¿[HG
DISMANTLING THE WHEEL
- Remove the pin.
- Remove the wheel.
- Disengage the locking system by holding down the red
triangular button under the locking system.
- Remove the V-shaped wheel support from the upper
tube.
4.5 Installation of the handles
To mount the handles make sure that the basket stretcher
LVDOUHDG\HTXLSSHGZLWKHLWKHUWKHZHOGHGSODWHVSOXVWKH
handle adjustment shafts or the Tirol kit Adapter with the
handle adjustment shafts.
To mount the handle, disengage the pin by pressing the
red button and pulling it outwards.
Insert the handle hub on the shaft and secure the pin
pushing it inside while pressing the red button.
Repeat the procedure for all the handles.
For the one operator procedure, once the wheel has been
mounted, turn the assembly upwards and place the foot
end on the ground so that the stretcher remains in balance
without the help of a second operator and then proceed
applying the handles on the head side.