Ferno 21-00034, Руководство пользователя и по обслуживанию, Страница: 21 / 40

21
Tirol Kit
© Ferno s.r.l. Rel.30092022 ENG.
Instructions
1. Insert the one RPIM8X16A2 washer on each screw
2. Apply the threadlocker on the threaded edge of the four
VTBTXM8X16A2 screws
3. Insert four VTBTXM8X16A2 screws into the uppermost
through holes of the welded plate from the outer side of
the plate
4. Apply the threadlocker on the threaded edge of the four
VTBTXM8X20A2 screws
5. Insert four VTBTXM8X20A2 screws into the lowermost
through holes of the welded plate from the outer side of
the plate
6. Place the Tirol Kit Handle Adjustment Shaft against the
inner side of the welded plate so that the yellow line is at the
top and the red one at the bottom.
7. Screw it in place with a Torx wrench T40.
4.3.2 Handle Adjustment Shafts installation
on basket stretcher with Tirol Kit Adapter
Necessary equipment
1 5 mm Allen wrench
2 Tirol Kit Handle Adjustment Shafts
16 UNI9327A4M8x35 Hexagon socket head caps crews
with low head
1 Loctite (threadlocker)