Model 101-H Operating Table
6
© Ferno-Washington, Inc 234-1994-03 October 2010
3.2 general specifications
Overall Length
80 in./2032 mm
Width
30 in./762 mm
Height
Minimum
28.5 in/724 mm
Maximum
40.5 in./1029 mm
Wheels
8 in./203 mm
Wheel Base
24.5 x 48.5 in/ 622 x 1232 mm
Table Surface
Type 304 Stainless Steel, #3 Finish
Weight
Overall
158 lb/72 kg
Table Top
59 lb/27 kg
Table Base
90 lb/41 kg
Table Base Cover
9 lb/4 kg
Load Limit
600 lb/272 kg
3 - abOUT THe Table
About the Table
3.1 Description
The Ferno
®
Model 101-H Hydraulic Operating Table
(referred to as the “table” in this manual) is designed to
provide an adjustable surface for autopsy, embalming,
dressing, and transfer.
The table is for professional use only.
The table base is equipped with two hydraulic jacks operated
by foot pedals to control the height of the table top.
Table-TOP FeaTUres
●
Type 304 stainless-steel surface
●
Extra-deep trough around table-top perimeter
●
Drain
Table-base FeaTUres
●
Foot pedals for easy adjustment of table-top height and tilt
●
Wheel-locking system that simultaneously controls all
four wheels with one foot pedal
Warning
improper use of the table can cause injury. Use the
table only for the purpose described in this manual.
load limit
Inspect the table if the load limit
has been exceeded (See
Inspecting
the Table,
page 13).
600 lb
272 kg
Metric conversions are calculated before rounding the Imperial
measurements. For more information, contact Ferno Customer Relations
(page 2) or your Ferno distributor.
Ferno reserves the right to change specifications without notice.