Fermax iLOFT-IP CITY, Руководство пользователя

Страница: 22 / 49

Page 22
ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit ADS iLoft IP Kit
Connection via Local Network: Programming the IP address
The image above shows a standard installation, with the ADS IP interface and several PCs
interconnected in a network.
As you can see, each piece of equipment connected to a network has its own IP address
that identifies it and distinguishes it from the others.
In order for the pieces of equipment (interface, PC, etc.) to be able to find and communicate
with each other, the IP addresses must be of the same type:
In the image, the three PCs belong to the same network, as they have the same type of
IP address: 172.30.111.xx. (172.30.111 defines the type of network and "xx" identifies
each piece of equipment in the network). In this case, the PCs can communicate with
each other.
Note that the ADS IP interface has an IP address that does not belong to the network we
want our ADS installation to communicate with (the address shown on the IP interface
is the address assigned in the factory, 192.168.1.168); therefore, in order for the ADS IP
interface to be able to communicate with the network, it must have an IP address of the
same type as that used in the local network, that is, 172.30.111.xx.
In this case, the address 172.30.111.34 will be assigned to it (xx can have a value
between 1 and 255).
Restore Default
Configuración
Fábrica
Reset POWER LAN PRG CH
INTERFAZ IP ADS ADS IP INTERFACE
REF. 1304
INPUT 18V 500 mA
Ethernet
Network
IP Address: 172.30.111.35
IP Address: 172.30.111.31
IP Address: 172.30.111.32
IP Address:
192.168.1.168
With the exception of the factory IP address of the interface, (192.168.1.168), all the other IP
addresses are examples used to explain the interface IP address configuration process.
The IP addresses differ from one network to another, and it will therefore be necessary
to know what kind of IP addresses are used in the network in which you want to install the
interface.
The IP interface has an internal web server that makes it possible to configure the IP
address using a web browser.
The steps to modify the interface’s IP address are explained below.