Fermax DUOX VIDEO MARINE KIT 1-2 L, Руководство пользователя и инсталлятора

Страница: 49 / 65

Page 17
DUO DUO
DUO DUO DUOX CITYLINE KIT 1-2L
X CITYLINE KIT 1-2L
X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L DUO DUO
DUO DUO DUOX CITYLINE KIT 1-2L
X CITYLINE KIT 1-2L
X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L X CITYLINE KIT 1-2L
Option 2: From the Monitor Monitors can be programmed on the screen menu.
Program the call number: Press

on the previous screen and access the screen to
program the residence's number (numbers from right to left).
Each time the + is pressed the number increases (starting with 1) and the arrow is used
for moving the cursor. A white cursor indicates where the digit will be entered. Program the
corresponding number and accept with

.
2222
The monitor will automatically connect with the entry panel, activating the camera. Enter
the calling code for this monitor from the panel. Depending on the type of panel installed:
- pressing the corresponding button or
- by entering the code + bell.
Notes:
- The time between selecting the programming option from the Panel + Monitor until
the button is pressed on the entry panel must be less than 2 and half minutes.
- Programming is always done from the panel activated as the master panel.
A different call tone is produced, confirming the monitor's programming and the camera's
image is still viewed. A
fter a few seconds the monitor returns to standby.
MENU
F1
The selected option is displayed with the white line under the icon. Press

and a screen
appears confirming the selected option (image of a face) and a beep sounds on the
monitor.