Fermax DUOX SKYLINE Series, Руководство по установке

Страница: 40 / 72

Pag 40
Pag 40
DUO DUO DUO DUO DUOX X X X X A A A A Audio Sk udio Sk udio Sk udio Sk udio Skyline yline yline yline yline
DUO DUO
DUO DUO
DUOX X
X X
X A A
A A
Audio Sk udio Sk
udio Sk udio Sk
udio Skyline yline
yline yline
yline
DUO DUO
DUO DUO DUOX
X
X X X A
A
A A Audio Sk
udio Sk
udio Sk udio Sk udio Skyline
yline
yline yline yline
DUO DUO DUO DUO DUOX X X X X A A A A Audio Sk udio Sk udio Sk udio Sk udio Skyline yline yline yline yline
EN
DUOX Amplifier Call:
•
You can use the buttons with keypads to make direct calls
to specific apartments (professionals).
•
2 simultaneous conversation channels on the same pair.
•
The house terminal´s address is encoded with 6 digits
(calling code). The default value is 000000, (this can´t be
called from any street panel).
•
Panels with an address «0» in each block allow for
communication with telephones when disconnected if the
communication line is free. Communication is established
with the «0» panel of the block corresponding to the
telephone. If you do not want this feature do not assign
this address to any panels.
•
A telephone with the address 000000 can not establish
communication upon disconnecting.
•
If there are panels in the sub-block, no connection is made
upon disconnection, only with panel 0 of the block.
•
A call is made to the home:
- Button Panels: pressing the corresponding button.
- Panels with keypad: Entering the residence
bell. You do not need to enter the 6 digits. If a shorter
code is entered, it is filled in with «0» to the left. The
letter «A» can be used to delete the sequence entered.
EN
DUOX Amplifier Call:
•
You can use the buttons with keypads to make direct calls
to specific apartments (professionals).
•
2 simultaneous conversation channels on the same pair.
•
The house terminal´s address is encoded with 6 digits
(calling code). The default value is 000000, (this can´t be
called from any street panel).
•
Panels with an address «0» in each block allow for
communication with telephones when disconnected if the
communication line is free. Communication is established
with the «0» panel of the block corresponding to the
telephone. If you do not want this feature do not assign
this address to any panels.
•
A telephone with the address 000000 can not establish
communication upon disconnecting.
•
If there are panels in the sub-block, no connection is made
upon disconnection, only with panel 0 of the block.
•
A call is made to the home:
- Button Panels: pressing the corresponding button.
- Panels with keypad: Entering the residence
bell. You do not need to enter the 6 digits. If a shorter
code is entered, it is filled in with «0» to the left. The
letter «A» can be used to delete the sequence entered.