Page 17
L
LL
LLOFT DUO
OFT DUO
OFT DUO
OFT DUO
OFT DUOX
X
X
X
X
L
LL
LLOFT DUO
OFT DUO
OFT DUO
OFT DUO
OFT DUOX
X
X
X
X
Audio settings
While the audio channel is open the audio's volume can be regulated via a contextual menu
on the screen. In order to set the audio, press MENU and a menu screen appears for this
setting.
In the audio settings, use the arrows to increase
or decrease until reaching the desired setting.
FUNCTION
Door lock-release
When a call is received from the entry panel, you can open the door
at any time, by pressing the button
.
MENU
F1
Answering a call:
When the call button on the
Entry Panel
is pressed a call tone
sounds both on the panel and on the monitor, causing the screen
to start up.
You can pick up the phone and hold a conversation with the street
panel. The communication will automatically terminate after 90
seconds, or at any time by hanging up the phone.
If communication is not established with the entry panel, the moni-
tor will automatically turn off after 30 seconds.
With the monitor in standby
press the
auto start
button «camera»
. It will display the
possibility of performing the auto start with
different panels:
-
Panel 0:
Panel 0 of the monitor's corresponding
block.
-
Panel 1:
Panel 1 of the monitor's corresponding
block.
-
Panel 2:
This is the panel configured as Gene-
ral Entrance and with panel number 0.
Auto-Start:
Notes:
- Auto-start can only be done with the indicated panels. If you can not perform the auto-start,
ask your installer.
- After completing any communication with a panel, for the following15 seconds if you re-press
the auto-start button it will connect with this panel.